[WenEng]

Playing around with my SL40 and SL30 I inserted a blank pin into the connector easily enough and thought I could use my existing pin removal tool to get it out but it has too large a diameter to insert into the Garmin connector. What insertion/removal tool as well as crimping tool can I get to use for these connectors?

 

[Rick S.]

It's the green and white tool for high density pins. I used the same crimper for those pins as I did for all the other barrel type, a four jaw ratchet crimper.

http://www.steinair.com/images/store/SAT004.jpg

http://www.steinair.com/images/store/sat034.jpg

 

[L.Adamson]

http://www.steinair.com/tools.htm

4-way crimper, and red & white removal tool.

edit: So these are not the high density. But the ones I used for the Garmin SL-40

 

[WenEng]

As usual... Thanks for your help. I look forward...

one day to have the experience to help others as well.