A andrewtac Well Known Member Nov 15, 2019 #1 What are the two safety wired screws for? Bottom two holes on same side empty and 4 on other side are empty.
What are the two safety wired screws for? Bottom two holes on same side empty and 4 on other side are empty.
Toobuilder Well Known Member Nov 15, 2019 #2 Balast plates are typically installed for prop balance. Looks like you just needed screws on one side to bring the prop into spec.
Balast plates are typically installed for prop balance. Looks like you just needed screws on one side to bring the prop into spec.
A andrewtac Well Known Member Nov 15, 2019 #4 That is what I assumed, thanks. Learning how all this works.
