TerryPancake said:I might be wrong(won't be the first time) my plans are 1300 miles away, but is that the one you have to cut from supplied tubing? Is that the one the bellcrank pivots on?
Radomir said:check your bag inventory sheet.. (or go straight for bag 1993-1.. might be in that one)
bmurrish said:I'm working on the same part. Correct me if I'm wrong, but it looks like you need to trim it down a little and drill it out so the bolt will fit through.
I did have to grind the weldment a bit to get it to fit between the brackets. Also, the instructions say that you want to tighten the bolt on the bushing, so I gather that the bracket must "float" between the brackets a bit.