Don Patrick
Well Known Member
I have a primary alt plane power 70 amp with a LR3C regulator. I have a VP-100 and my Alt field wire is powerd by J6 pin 2.
From what i am reading, that power pin will go to terminal 6 of the LR3C. The LR3C also requires power to terminal 3 with a 2A fuse. Can i take that from an unused power pin, say J6 pin 1 and set it with the 1U setting and change the wire to 2A?
Thanks
Don
From what i am reading, that power pin will go to terminal 6 of the LR3C. The LR3C also requires power to terminal 3 with a 2A fuse. Can i take that from an unused power pin, say J6 pin 1 and set it with the 1U setting and change the wire to 2A?
Thanks
Don