moespeeds

Well Known Member
Friend
I'm installing my B&C L40 Alternator, and LR3D-14 Regulator in my RV8.

I've got a shunt right on the firewall between the alternator output and the buss. Rather than run the terminal #3 voltage sensor wire all the way to the buss, can't I just jump off the buss side of the shunt? It would be much easier than running another wire to the buss.
 

Attachments

  • B&C WIRING.png
    B&C WIRING.png
    264.3 KB · Views: 18