vlittle
Well Known Member
In anticipation of Garmin one day supporting voice alerts on the GPSMap 296 in aviation mode, I wired the Speaker+ output to my Audio bus (Vx Aviation AMX-1A http://www3.telus.net/aviation/vx.html ).
I didn't expect any voice output because Garmin does not support this in Aviation mode, but I was quite suprised when I got a voice power failure alarm.
This may be a useful function for some applications where it's handy to detect a tripped breaker. FYI.
Now, if Dynon would just add voice alerts to the D10A for the AOA or other functions, we'd be set.
Vern Little RV-9A
I didn't expect any voice output because Garmin does not support this in Aviation mode, but I was quite suprised when I got a voice power failure alarm.
This may be a useful function for some applications where it's handy to detect a tripped breaker. FYI.
Now, if Dynon would just add voice alerts to the D10A for the AOA or other functions, we'd be set.
Vern Little RV-9A