[nippaero]

I just got my new Vetterman Exhaust. I have two sets of gaskets. Should I use the thin copper Rapco ones that came with the exhaust or the thicker blo-proof 77611 gaskets I have?

 

[scard]

The one on the left please.

 

[az_gila]

Good description here from AvWeb -

http://www.avweb.com/news/maint/183932-1.html

And, if you do use the one on the <left-wrong> right, use a pair of them interlocked as described above.


Edit - I meant the right hand one that is made of the thin copper with a beaded circle. They should be used two one each location as per the article.

 

[moosepileit]

Pair- one on the right is paired, correct?

 

[nippaero]

I am not sure what you mean by paired. There are only four gaskets. One per cylinder right?

 

[krw5927]

Pair- one on the right is paired, correct?

Is this another case of upside-down photos? I see the Blo-proof FAA-PMA SL77611-M on the left. That is my preference.

If you install the thin copper ones, you'll need 8 as mentioned in the article Gil referenced.

 

[nippaero]

Ok. That makes sense now. I was thinking maybe somehow you used both together. I will go through that article and use the 77611's.

Thanks guys