BravoAlphaRomeo
Active Member
Hi gang,
Looking for some pictures of the Vetterman 2 pipe crossover exhaust exiting the bottom of the cowl on a 14A. I cut the “slots” to allow the pipes to exit and wondering about option to finish this out. I have a section of fiberglass cowl between the nose gear leg and the pipe on each side. Those pieces are not attached aft to anything. Anyway, thanks for any ideas/direction.
Looking for some pictures of the Vetterman 2 pipe crossover exhaust exiting the bottom of the cowl on a 14A. I cut the “slots” to allow the pipes to exit and wondering about option to finish this out. I have a section of fiberglass cowl between the nose gear leg and the pipe on each side. Those pieces are not attached aft to anything. Anyway, thanks for any ideas/direction.
