I'm getting no help over at the "electrical systems" so I'll try here. I am at the panel planning, acquiring instruments and doing wiring drawings, stage on my -7 build.
I'll be using a MGL Voyager, Microair radio and Microair transponder. The panel is a basic day/night VFR. No IFR.
I like the EXP 2 Bus that Van's offers and am intrigued by the wiring harness that they offer. Some like it, some say it is not worth it. The cost of wire alone is just about the cost of the harness. I know some connectors will need to be cut and modified, but it seems like a great place to start.
I would like to see a wiring diagram of the harness if someone would be kind enough to send it to me. Either a pm or an email to [email protected].
Then I can get a feel for what additional things I need to order from SteinAir.
Thanks,
Darren
I'll be using a MGL Voyager, Microair radio and Microair transponder. The panel is a basic day/night VFR. No IFR.
I like the EXP 2 Bus that Van's offers and am intrigued by the wiring harness that they offer. Some like it, some say it is not worth it. The cost of wire alone is just about the cost of the harness. I know some connectors will need to be cut and modified, but it seems like a great place to start.
I would like to see a wiring diagram of the harness if someone would be kind enough to send it to me. Either a pm or an email to [email protected].
Then I can get a feel for what additional things I need to order from SteinAir.
Thanks,
Darren