pastranafan5
Active Member
Is anybody using their harness? Did it give you everything you need, or did you have to add to it?
I carefully deliberated this as well. I bought the harness and in my opinion you should see if you can get a diagram first to see the switches and placement that the harness allows for those switches. In my case I used a Cessna switch panel that will remove for maintenance, I did this after I had ordered the panel so the configuration of the harness was all wrong!
Very useful was the gauge of each wire and to each fixture or instrument. However I would STRONGLY recommend buying Bob Kukolls book and going over it first before any serious wiring begins, unless that is your trade.
So in a nutshell the wiring harness works and comes to you ready to go BUT does it fit your build and your mission profile.... Mine didnt.
Dave