L Larry DeCamp Well Known Member Friend Oct 15, 2015 #1 Yes, I know you can guess until it looks reasonable a idle. But surely someone knows whether to use .5 or 1 PPR . I know 2 (like from EI ) is not correct. Thanks for the help .
Yes, I know you can guess until it looks reasonable a idle. But surely someone knows whether to use .5 or 1 PPR . I know 2 (like from EI ) is not correct. Thanks for the help .
Mike S Senior Curmudgeon Oct 15, 2015 #2 As I recall, the magic number is 4. 8 pulses per rev, but running at half engine speed. This was for the transducer unit Vans sells.
As I recall, the magic number is 4. 8 pulses per rev, but running at half engine speed. This was for the transducer unit Vans sells.
L Larry DeCamp Well Known Member Friend Oct 15, 2015 #3 Thanks much Mike This makes sense. I had the Pmag default 2 in the MGL tach and read 1600 around idle on first start. Thanks much...Larry
Thanks much Mike This makes sense. I had the Pmag default 2 in the MGL tach and read 1600 around idle on first start. Thanks much...Larry
n82rb Well Known Member Oct 15, 2015 #4 i recently hooked on up in my dynon skyview. it is 8 pulses per rev at half speed so use a setting of 4. bob burns N82RB RV-4
i recently hooked on up in my dynon skyview. it is 8 pulses per rev at half speed so use a setting of 4. bob burns N82RB RV-4