[SteveK]

I bought the vans tachometer gauge years ago but now need the sender that they have discontinued. Ie vtachgen 2. Any ideas of where to get it, or a substitute?

Thanks

 

[Steve]

I was once told that vtachgen came from an 80's vintage Ford LTD. It was part of the cruise control system.

 

[Ralph Inkster]

Tech sensor

This might be worth experimenting with

https://www.amazon.com/AutoMeter-52...BYAQNTKAGH9&psc=1&refRID=7Q6TX9SSFBYAQNTKAGH9

 

[gasman]

This might be worth experimenting with

https://www.amazon.com/AutoMeter-52...BYAQNTKAGH9&psc=1&refRID=7Q6TX9SSFBYAQNTKAGH9

This is a model 5293 2 wire. Vans uses a 0503 model, a three wire unit.

 

[mikebrad]

I think I have one at the hangar I will look and let you know tomorrow..

 

[Dean Pichon]

Hi Steve,

I, too, have one you are welcome to take. Let me know if you need it.

Regards,

Dean
Bolton, MA

 

[gasman]

Best to use these with electronic ignition to make it simple.

 

[Ralph Inkster]

3 wire VDO sender, maybe this one

https://www.vdo-gauges.com/sensors/standard-gm-7-8-18-thread-aluminum-body.html

 

[gator]

Vans tach sender

Mike, Dean
If either of you still have one I sure could use.
Please let me know if you do