grayforge
Well Known Member
Hi everyone,
I remounted my engine after a bunch of firewall work and when I fitted the prop governor control cable through the specified location in the firewall, then to the governor bracket (on a PCU5000X/Jihostroj), I had to make a pretty sharp 'S' between the panel and firewall to accommodate the length. If it were 5.0" shorter (43" vs 48"), there would be a very nice gentle 'S' between panel and firewall.
Have others seen the same thing? I don't have a photo of the tight 'S', but the photo below shows how I think it should look firewall forward.
What do others think?
Thanks,
Russ
I remounted my engine after a bunch of firewall work and when I fitted the prop governor control cable through the specified location in the firewall, then to the governor bracket (on a PCU5000X/Jihostroj), I had to make a pretty sharp 'S' between the panel and firewall to accommodate the length. If it were 5.0" shorter (43" vs 48"), there would be a very nice gentle 'S' between panel and firewall.
Have others seen the same thing? I don't have a photo of the tight 'S', but the photo below shows how I think it should look firewall forward.
What do others think?
Thanks,
Russ