Aero_Octaveus
Well Known Member
Tried to do a little research on if the use of threadlocker - Loctite Blue 242 or Permatex Medium Strength Blue is acceptable practice. I can't seem to find a clear answer.
I see that both RED and BLUE threadlock are called for under the RV-14's supply requirements on Page 03-04 of the Van's Manual.
I was considering using it on various screws and AN bolts an addition to torquing only as an added insurance measure. Obviously in more critical areas where a locknut or lockwire is used this is not necessary.
Thoughts?
I see that both RED and BLUE threadlock are called for under the RV-14's supply requirements on Page 03-04 of the Van's Manual.
I was considering using it on various screws and AN bolts an addition to torquing only as an added insurance measure. Obviously in more critical areas where a locknut or lockwire is used this is not necessary.
Thoughts?
Last edited: