Andrew Maschmedt
Member
I am having difficulty aligning the Upper Fuselage Longeron to the Upper Engine Mount Bracket WD-602 on both side of the fuselage.
I have completed the first longeron bend at station 29 ?? and the long curve but have not as yet fully completed the twist which begins at the rear most point of WD-602 and station 29 ??.
It appears that WD-602 does not ?point? directly at station 29 ??. If I extend a straight line along the arms of WD-602 they meet the fuselage jig before station 29 ??. In other words the arms point too high (towards the workshop floor).
I have checked the height of the firewall relative to the jig and confirmed the 24 ?? dimension.
Can anyone advise please
http://i1348.photobucket.com/albums/p738/amaschmedtRV6andy/IMG_1211_zpse6da18f1.jpg
I have completed the first longeron bend at station 29 ?? and the long curve but have not as yet fully completed the twist which begins at the rear most point of WD-602 and station 29 ??.
It appears that WD-602 does not ?point? directly at station 29 ??. If I extend a straight line along the arms of WD-602 they meet the fuselage jig before station 29 ??. In other words the arms point too high (towards the workshop floor).
I have checked the height of the firewall relative to the jig and confirmed the 24 ?? dimension.
Can anyone advise please
http://i1348.photobucket.com/albums/p738/amaschmedtRV6andy/IMG_1211_zpse6da18f1.jpg
Last edited: