BoilermakerRV
Well Known Member
I'm trying to assemble my firewall for match drilling. I'm having a heck of a time getting the pre-punched holes in the F-601K-1 recess to line up with the pre-punched holes on the F-601A-1 firewall. It seems that the upper most, 1/8" holes on the side flanges aren't far enough apart. However, this distance is set by the factory and I'm unsure how to get everything fitting well together.
I thought about cutting a slot in the upper corners to increase the flexibility of the part enough to line everything up. Anyone else dealt with this issue?
Thanks!
![Picture1.jpg](/community/proxy.php?image=https%3A%2F%2Flh5.googleusercontent.com%2F-HfutROJQRVY%2FUu8F28gCAYI%2FAAAAAAAAC1Y%2F2JPri_ixjnw%2Fs400%2FPicture1.jpg&hash=28add2ff0fc109c712734d3031b5ea64)
I thought about cutting a slot in the upper corners to increase the flexibility of the part enough to line everything up. Anyone else dealt with this issue?
Thanks!