Yes, that's right...my laziness knows no bounds. Had to cut a bunch of notches in the F-703B panel stiffening angle. Instead of the usual drilling, cutting, and filing, I took an alternate route. Posting here in case anyone else aspires to be as lazy as I am:
Made a template (shown laying upside down here):
Used some guide bushings in the router with a 1/8" diameter router bit:
Test part (view from below):
Finished F-703B. Took maybe 1 or 2 minutes per slot.
A close-up view:
Have fun!
Made a template (shown laying upside down here):
![20210510-03-tn.jpg](/community/proxy.php?image=http%3A%2F%2Four7a.com%2Fimages%2F20210510-03-tn.jpg&hash=b857c7cef3c36fd236975b04c645e333)
Used some guide bushings in the router with a 1/8" diameter router bit:
![20210511-02-tn.jpg](/community/proxy.php?image=http%3A%2F%2Four7a.com%2Fimages%2F20210511-02-tn.jpg&hash=fa27275bc9803f284fc481edc78aa949)
Test part (view from below):
![20210511-04-tn.jpg](/community/proxy.php?image=http%3A%2F%2Four7a.com%2Fimages%2F20210511-04-tn.jpg&hash=5cfe4051f27761954c3a6528f1673530)
Finished F-703B. Took maybe 1 or 2 minutes per slot.
![20210511-05-tn.jpg](/community/proxy.php?image=http%3A%2F%2Four7a.com%2Fimages%2F20210511-05-tn.jpg&hash=548c341ed25efed55d7abe5bb58d1f68)
A close-up view:
![20210511-06-tn.jpg](/community/proxy.php?image=http%3A%2F%2Four7a.com%2Fimages%2F20210511-06-tn.jpg&hash=3a3b18cc8f0c24939ee48999077ac3cc)
Have fun!