[aadamson]

Anyone know if the UMA EL Light bezels can be "notched" for a TAS adjustment knob (as an example)? I need to grind a 1/8" round notch in one to clear the knob on my TAS Airspeed indicator. I can't remember if these can be "cut" or not... If not, I can use an Altimeter version, but I was trying to keep more of the light strip intact and not have a huge .5-.75" gap around a rather small post.

Thanks in advance,

 

[N797RV]

Alan,

You can buy them with the cutout in them. Check out their website at

http://www.umainstruments.com/

and look under the E.L. lighting tab.

 

[aadamson]

Alan,

You can buy them with the cutout in them. Check out their website at

http://www.umainstruments.com/

and look under the E.L. lighting tab.

Thanks Dick, yes, I know but wanted one cut a little different than "stock". For the record, I heard back from ED at UMA. He said, no they can not be cut, it will ruin the EL strip.... So, I think I've got it covered by using the "altimeter" or VSI cut one...