Heads up on two issues. Today I mounted the GPS and XM antennas on the F-1201Z Retaining Plate. The holes in the plate for the GXM 30A antenna were in the wrong place and the plate did not match the figure on Page 42-11. I drilled new holes.
I think there is another error. On Page 29-02 K1000-08 (8-32) nutplates are installed on F-1201R. On Page 42-11 Figure 2 calls for AN526C632R8 (6-32) screws to go into these nutplates.
I'll email Van's on these two minor issues.
I think there is another error. On Page 29-02 K1000-08 (8-32) nutplates are installed on F-1201R. On Page 42-11 Figure 2 calls for AN526C632R8 (6-32) screws to go into these nutplates.
I'll email Van's on these two minor issues.