[moll780]

Anyone have any pics of how they mounted the pitch servo for their trutrack AP in a -7 or 9?

 

[Brantel]

https://www.google.com/search?q=site:+vansairforce.com+pitch+servo&espv=2&biw=2560&bih=955&source=lnms&tbm=isch&sa=X&ved=0CAkQ_AUoBGoVChMIi6DZ4oWayAIVQ1oeCh13Mw5h

https://www.google.com/search?q=site:+vansairforce.com+pitch+servo&espv=2&biw=2560&bih=955&source=lnms&tbm=isch&sa=X&ved=0CAkQ_AUoBGoVChMIi6DZ4oWayAIVQ1oeCh13Mw5h#tbm=isch&q=rv+pitch+servo+mounting

You will have to weed out many of the images but there are tons of what you ask for in here.

Keep in mind that most of the brands mount in a similar fashion on the 6,7 & 9.

 

[moll780]

Thanks!! checking your pics now.

https://www.google.com/search?q=site:+vansairforce.com+pitch+servo&espv=2&biw=2560&bih=955&source=lnms&tbm=isch&sa=X&ved=0CAkQ_AUoBGoVChMIi6DZ4oWayAIVQ1oeCh13Mw5h

https://www.google.com/search?q=site:+vansairforce.com+pitch+servo&espv=2&biw=2560&bih=955&source=lnms&tbm=isch&sa=X&ved=0CAkQ_AUoBGoVChMIi6DZ4oWayAIVQ1oeCh13Mw5h#tbm=isch&q=rv+pitch+servo+mounting

You will have to weed out many of the images but there are tons of what you ask for in here.

Keep in mind that most of the brands mount in a similar fashion on the 6,7 & 9.

 

[rzbill]

Follow this drawing for the Trutrak bracket install in a 7.
Please remember that the dimensions apply to a Trutrak provided bracket, not necessarily others like Dynon or GRT even though they "copied" the Trutrak format.

Post on VAF of Trutrak install dwg

Note this drawing does not show the hardware (IE. safety washers) and bolt spacers required for a safe installation. Please look at their site or contact Trutrac for the complete package of instructions.