Toobuilder
Well Known Member
I've been flying behind a DGSV II for several years and thousands of miles of rock solid performance until yesterday. The 1 hour flight to Vegas found the roll wandering constantly up to about 5 degrees either side of level. This oscillation took about 2 seconds to cycle. It only does this when tracking a flight plan, and I did try an in flight reboot.
I'm thinking there is a setting I can change, but my real question is why did this behavior show up? Nothing has changed on the airplane other than re - rigging the rudder hinges.
Thoughts are appreciated.
I'm thinking there is a setting I can change, but my real question is why did this behavior show up? Nothing has changed on the airplane other than re - rigging the rudder hinges.
Thoughts are appreciated.