drone_pilot
Well Known Member
Okay,
I have squeeged epoxy all over my pink cowling. Now it's time to sand. My question is what is the sanding grit progression to get to a surface suitable to shoot two part primer? I.e. Start with 100 grit to 150grit, then end up at ______grit? Please help. Sanding never has been a favorite but if I knew what I was doing, it might be a little more enjoyable.![Grinning face with big eyes :smiley: 😃](https://cdn.jsdelivr.net/joypixels/assets/7.0/png/unicode/64/1f603.png)
I have squeeged epoxy all over my pink cowling. Now it's time to sand. My question is what is the sanding grit progression to get to a surface suitable to shoot two part primer? I.e. Start with 100 grit to 150grit, then end up at ______grit? Please help. Sanding never has been a favorite but if I knew what I was doing, it might be a little more enjoyable.
![Grinning face with big eyes :smiley: 😃](https://cdn.jsdelivr.net/joypixels/assets/7.0/png/unicode/64/1f603.png)