Craig
Well Known Member
Tru Trak has a service bulletin that addresses the possibility that the servo arm retaining screw might come loose. They will send you a bracket for free that will fix the problem.
My roll servo screw retainer was no problem. My pitch servo retainer had a clearance problem with the bracket that the servo is mounted on. Here is a picture to show the interference:
![](/community/proxy.php?image=http%3A%2F%2Fimg697.imageshack.us%2Fimg697%2F772%2Fretainer.th.jpg&hash=5c26c949c98efc549c6fd99c4c0583ed)
I will grind an arc in the servo mounting bracket to clear the screw retainer bracket.
My roll servo screw retainer was no problem. My pitch servo retainer had a clearance problem with the bracket that the servo is mounted on. Here is a picture to show the interference:
![](/community/proxy.php?image=http%3A%2F%2Fimg697.imageshack.us%2Fimg697%2F772%2Fretainer.th.jpg&hash=5c26c949c98efc549c6fd99c4c0583ed)
I will grind an arc in the servo mounting bracket to clear the screw retainer bracket.
Last edited: