[Don Patterson]

I want to cut the hole for my ADI Pilot II but without the instrument in hand and with limited space between other instruments, I need to know the overall size of the ADI. I can get the hole cutout dimensions from there web page but the square part of the body is the size I need. I am mounting an altimeter just below and I need enough space between them. I would think the size would be a standard but don't know for sure. If any one has one of these and would measure the outside diameter of the square body I would appreciate it. It should be about 3.250 like the altimeter. Thanks
Don

 

[mdevans9]

TruTrak ADI II dimensions

Don, I just measured my Trutrak ADI II, and the box is 3 7/16 x 3 7/16, and is 4 19/32 deep not including the connector, which adds another 11/64 to the depth.

 

[Don Patterson]

Merrill Thanks for taking the time and making the measurement. Your information is exactly what I need to continue. I hope I can return the favor some day. Thanks again Merrill.
Don