UnPossible
Well Known Member
Hey - I'm getting ready to hang my engine and want to get the prop govenor mounted before I mount the engine.
I can get the governor on the engine, but when I mount the bracket, it sticks out nearly horizontially. Looking at others pics, it appears that the bracket is up at ~ a 45 degree angle. If I try and rotate it to the next screw, it hits the oil filter. (See Pic below)
Did I somehow mount the governor bracket wrong? Or is my oil filter in a non-traditional place that will require modifying / making a new bracket? Any Suggestions?
Thanks,
Jason
I can get the governor on the engine, but when I mount the bracket, it sticks out nearly horizontially. Looking at others pics, it appears that the bracket is up at ~ a 45 degree angle. If I try and rotate it to the next screw, it hits the oil filter. (See Pic below)
Did I somehow mount the governor bracket wrong? Or is my oil filter in a non-traditional place that will require modifying / making a new bracket? Any Suggestions?
Thanks,
Jason
![260pjmh.jpg](/community/proxy.php?image=http%3A%2F%2Fi53.tinypic.com%2F260pjmh.jpg&hash=79a885feb59d1e867ca6415e2810abf4)