i bought a CDI torque wrench from avery Tools
http://www.averytools.com/prodinfo.asp?number=4920
I put it to use on the bolts for the HS411 brackets which call for 20-25 in/lb. I am expecting a click once the torque is reached but i do not get that and after tightining too much one of the bolts actually breaks. Another bolt and a nut are now stuck becuase i tightened too much. Anywyas, i can take care of these issues but my questions is, did i miss something on how the torque wrench is upposed to work???? Or is it just defective?
http://www.averytools.com/prodinfo.asp?number=4920
I put it to use on the bolts for the HS411 brackets which call for 20-25 in/lb. I am expecting a click once the torque is reached but i do not get that and after tightining too much one of the bolts actually breaks. Another bolt and a nut are now stuck becuase i tightened too much. Anywyas, i can take care of these issues but my questions is, did i miss something on how the torque wrench is upposed to work???? Or is it just defective?