T travd23 I'm New Here Aug 22, 2008 #1 Could anyone tell me the minimum tools I should get for doing the empennage kit? Thanks, Travis
T Transporter Well Known Member Friend Aug 22, 2008 #2 Tools The "Bare Bones" kits offered by Avery (www.averytools.com) and Cleaveland (www.cleavelandtoolstore.com) should give you a good starting point. Isham (www.planetools.com) and Brown (www.browntool) are also good companies to deal with. These companies will work with you to customize your kit and can delete items you already own so you don't end up with duplicates. Used tool sets are often listed here on VAF, but go quickly! Mike
Tools The "Bare Bones" kits offered by Avery (www.averytools.com) and Cleaveland (www.cleavelandtoolstore.com) should give you a good starting point. Isham (www.planetools.com) and Brown (www.browntool) are also good companies to deal with. These companies will work with you to customize your kit and can delete items you already own so you don't end up with duplicates. Used tool sets are often listed here on VAF, but go quickly! Mike
F Flyer68 Well Known Member Aug 22, 2008 #3 empannage The tool kits from Avery, in Texas, and Cleveland, in Ohio are just about right. There are others who sell starter tool kits, but I haven't had any experience with them.
empannage The tool kits from Avery, in Texas, and Cleveland, in Ohio are just about right. There are others who sell starter tool kits, but I haven't had any experience with them.
