Brantel
Well Known Member
I need to continue the quest to get a nice fit on the tipup canopy skin and have a few problem areas and need to know what you guys have done with these areas. Please offer your thoughts on the best way to deal with these spots:
I took seaming pliers to the front lower corners and bent the edge in toward the fuse on the last 1/4" or so at the bottom. You can see that in the pic. Even with this, there is still an gap and you can see right thru there from the inside.
![DSCN6274-1.jpg](/community/proxy.php?image=http%3A%2F%2Fi279.photobucket.com%2Falbums%2Fkk133%2Fbrantel%2FDSCN6274-1.jpg&hash=d6ca3904219d7a26400ad5c5c54e774c)
I took seaming pliers to the front lower corners and bent the edge in toward the fuse on the last 1/4" or so at the bottom. You can see that in the pic. Even with this, there is still an gap and you can see right thru there from the inside.