How did most people glass/fair-in the elevator tips to the front of the lead counterweight on the 7? I want to keep it as simple as possible and not fiberglass the tip to aluminum gap. I'm debating on laying glass over the entire front if the elevator horn (covering lead and 2 counterweight screws). In order to do this I think I need to cut the vans tips 1/4-1/2 inch back from the front face of the counterweight to form a scarf joint and build up the top and bottom radius of the horn (inboard of the tip) with flox to match the shape of the elevator-tip and lay glass over this. Any ideas?
Thanks,
Andy
Thanks,
Andy