RAY DIESEL
I'm New Here
I have an rv6a, and when you open/close the canopy from one side or the other alone, the canopy twists and gets jammed. Does anyone have any solutions?
Even with stiffeners you will have flex and misalignment. As mentioned above, as you lift from the aft corner, apply inward pressure. I lift from the side just enough to get my fingers under the center of the aft end of the canopy and lift from there. Ditto when closing from the outside.
I have an rv6a, and when you open/close the canopy from one side or the other alone, the canopy twists and gets jammed. Does anyone have any solutions?