Those Builders who have come before me,
I am starting to cut my RV-7A tip-up canopy and wanted to check in.
The plans call out to pre-cut the excess around the canopy then place it on the canopy frame to begin the real trimming process. I wanted to know if I should cut at the top of the distorted areas (this is the area where the manufacturing forming frame marks/lines/impressions) are in the plexiglas. I don't want to inadvertantly cut off too much.
Any help would be appreciated.
Paul
I am starting to cut my RV-7A tip-up canopy and wanted to check in.
The plans call out to pre-cut the excess around the canopy then place it on the canopy frame to begin the real trimming process. I wanted to know if I should cut at the top of the distorted areas (this is the area where the manufacturing forming frame marks/lines/impressions) are in the plexiglas. I don't want to inadvertantly cut off too much.
Any help would be appreciated.
Paul