Don Jones
Well Known Member
I wanted to make sure I had a good ground to the fuel senders, so I drilled a hole in the flange and counter-sunk it on the gasket side. Threaded the hole and screwed a #6 screw in then put a jam nut on the outside. Since the head of the screw will be covered in proseal (no gasket) during the sender install, no sealer is needed anywhere else, that way there will be no question about the quality of the ground. I plan to put a starlock under the nut, I just don't have any right now.
Simple and quick.
Simple and quick.
![sender1.jpg](/community/proxy.php?image=http%3A%2F%2Fwww.weflyforfun.com%2Fsender1.jpg&hash=8792be509255d762aa0c965677623719)
![sender2.jpg](/community/proxy.php?image=http%3A%2F%2Fwww.weflyforfun.com%2Fsender2.jpg&hash=a9ee9604b5aba1d712274ed0d29cbebf)