[lucaperazzolli]

I've just upgraded my website with some interesting solutions (I think) .

Now the electrical system main page contains this sub-sessions:

- (my) Wiring technique
- Breakers and switches side panel
- Whelen strobe power pack installation
- Firewall ground block
- Infinity stick mounting
- Dynon remote compass unit
- Wiring routing
- Back panel wiring and routing
- Avionics wiring

Hope this helps somebody

http://www.rv8.it/electrical.html

Bye

 

[vlittle]

Luke, I like how you mounted the Infinity grip. Running the cable down the outside of the stick totally avoids weakening it by drilling a hole near the fulcrum.

There was a long debate about this recently, with various suggestions on reinforcing the stick etc, but sometimes the simplest solution is the best.

Vern

 

[lucaperazzolli]

infinity hole

Vern,

in fact I read that thread about the hole facts into the stick and after some head scratching I choose my way.

First hole was in the back of stick but it does't run - full back stick movement hurt the seat; so I bought another one and drilled it to the right side. The stick will be covered with a stick boot.

ps: thanks for sharing your electric scheme