Erik Westlund
Member
I thought someone might find this usefull. when I made the closeouts for the tips I found that the elevator interfered with the closeout bulkhead I had made. so I added 6 more layers of 6 oz glass to the inside of it. then after it cured I took the die grinder with a 36 grit sanding disc and used the curve of the disc to dish it out. then cleaned it up with a little filler. now I'll prime it and be done.
have the same distance through the whole travel of the elevator now.
happy building
Erik
http://
[/IMG]
http://
[/IMG]
http://
[/IMG]
have the same distance through the whole travel of the elevator now.
happy building
Erik
http://
http://
http://
Last edited: