[PaulR]

I'm trying to get some things ready on the IP so when my FF kit gets here, I'm a little more ready. Does anyone know what size holes the Throttle and Mixture cable need for mounting to the bracket? Also, the bowden cables for carb and cabin heat?

Thanks

 

[rv9av8tr]

Holes sizes

The throttle hole is different than Mixture/Prop... but that might change based on what cables you end up using. My advice is don't cut holes until you can measure directly from the device to be installed.

 

[PaulR]

Assumption

Mike,
I guess I made the assumption that the cables from Van's with the FF kit for a FP were always the same. I know what assume means.

I was hoping someone else already had a FF kit they could do a little measuring on or knew from experience.

I really want to powder coat the panel and not have to drill anymore holes and those are the only things I don't have.

Thanks