Has anyone got suggestions/pictures for the throttle and mixture connection for a Mattituck TMX IO-360 cold air induction(horizontal) Precision EX fule injection engine? Van's mixture cable seems to be about 5 inches too short.
Has anyone got suggestions/pictures for the throttle and mixture connection for a Mattituck TMX IO-360 cold air induction(horizontal) Precision EX fule injection engine? Van's mixture cable seems to be about 5 inches too short.
I installed a YIO-360-M1B with Van's FWF kit. As usual, Mahlon's words are pure gold. Bolted to the sump, this is partial view of the mixture control bellcrank.I think the mixture cable attaches to a bell crank assembly, that is mounted above and behind the servo. I believe the bell crank attaches to the mixture arm, on the servo, not the mixture control cable..
Has anyone got suggestions/pictures for the throttle and mixture connection for a Mattituck TMX IO-360 cold air induction(horizontal) Precision EX fule injection engine? Van's mixture cable seems to be about 5 inches too short.