[RV8RIVETER]

Hello All

I would like to ask how everyone routed there cables thru the firewall? Are the 3 holes and the distance measurements specified on the drawings working well for everyone?

I am considering one large hole with an EPM firwall penetration seal kit. Any problems with that?

Just thought I would ask before getting out the drill.

Thanks, in advance.

 

[Ironflight]

Drawings Worked...

Wade -

I used Van's locations from the drawing, and they worked great, but of course, that is for the carb'ed O-360. I can't say if it will be true for other configurations.

Just one data point for you!

Paul

 

[walter]

I used Vans dimensions for my injected 360. Works fine.
Would I do it differently next time? Probably not.