Ok maybe that's a little dramatic but I'm so frustrated over this canopy. I had the euphoria inducing milestone of riveting on the last metal, the forward skin. My buddy then says let's put the canopy on. I didn't want to do it. I wanted to just revel in the moment of the last rivet going in. Well we attempted to put it on. The front catches on the forward skin in 3 places and is now deformed. The right side is now about 1/8 " further back so the canopy and rear window plexi now hit each other. That also means there's a larger gap on the right side at the front of the canopy. I only hope I can fix each problem spot so it looks half decent. I'm not building a show plane but I sure don't want people saying wow what a piece of **** canopy. Please let me know there's a light at the end of the canopy tunnel. I have a hangar waiting for me and this is what's holding me up from getting it there.