Jim P
Well Known Member
I'm in the process of wiring my Slick mags and have the 18 AWG shielded wire connected to the mag. Center conductor goes to p-lead, shield goes to mag ground stud.
Now for the really dumb question; how in the world do I test the wiring for the mag? I thought if I went tested resistance between p-lead to ground, it would show good connectivity with toggle switch OFF. Well, it shows the same with both ON and OFF. Matter of fact, I have good connectivity between p-lead and ground on the un-wired mag as well.
Any help?
Now for the really dumb question; how in the world do I test the wiring for the mag? I thought if I went tested resistance between p-lead to ground, it would show good connectivity with toggle switch OFF. Well, it shows the same with both ON and OFF. Matter of fact, I have good connectivity between p-lead and ground on the un-wired mag as well.
Any help?