[mikemalone]

Around 2-3 years ago, I purchased a Dynon Aileron Servo to be installed in the right wing of an RV7. The wing is now under construction. Today, I thought I would test the motor in situ. There are 7 wires from the servo. Am I right in concluding that if I wire up only the red and black wires that the motor should run? At the moment, when I do this, the motor does not run. Any help for the electrically challenged much appreciated.

 

[cfiidon]

Dynon servo

According to my wiring the red is power and black is ground. However, just supplying power won't make it move. It is a smart servo, and requires the DSAB connections to tell it what to do.

Don

 

[mikemalone]

Dynon Servo

Thanks for your quick answer, Don. That was what I was hoping for.