Av8torTom
Well Known Member
Just being cautious here before I start drilling holes and countersinking.
There are two bags of tank attach hardware - 1922-1 and 1922. I assume the 1922-1 platenuts and screws are for the top and bottom spar flange as seen in the photo below:
Then I enlarge the platenut rivet holes, machine countersink #40, rivet platenut under spar flang, then machine countersink screw hole #30 on top of flange???
Sound right?
There are two bags of tank attach hardware - 1922-1 and 1922. I assume the 1922-1 platenuts and screws are for the top and bottom spar flange as seen in the photo below:
![platenutandscrew.jpg](/community/proxy.php?image=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj150%2Fav8tor215%2FRV-9A%2Fplatenutandscrew.jpg&hash=936bccc007f31ffad3a43ab53530bd1d)
Then I enlarge the platenut rivet holes, machine countersink #40, rivet platenut under spar flang, then machine countersink screw hole #30 on top of flange???
Sound right?