[shiney]

Has anyone had any experience of undoing the tank access plates once they have been proseealed? can it be done and if it can, what is the best way?

Martin

 

[scard]

Yep, a lot of us have. My required tools were a putty knife and two phenolic scrapers.

 

[shiney]

sorry, but what is a phoenlic scraper?.

 

[scard]

sorry, but what is a phoenlic scraper?.

It is a non-metal scraper that won't damage the pieces it is used on.
http://www.averytools.com/pc-909-100-phenolic-scrapers.aspx
You've spent all that time deburring parts, you don't want to put a big gouge in the tank rib with a metal scraper or putty knife.

 

[frankh]

I got a Stainless steel Rule

about 1inch wide and sharpened the end on the grinder/scotchbrite wheel.

Perfect tool for the job. I didn't use any other tools.

Frank

 

[shiney]

Thanks fellas, I've ordered some.


Martin