[MartySantic]

Wanted to post the following information received from Van's. The SB437-4 bushing will not fit in the hole in the F-1211-A bulkhead. My bulkhead has the same problem that a friend's had. Page 10-04, Step 14, Figure 3.

From Joe Blank at Van's.......
"The SB437-4 will need to be drilled out to 7/16"

 

[Fl Mac]

Ya, mine was the same way. I went ahead and drilled it out. I guess I should have called first, but it seemed logical to just drill it out. Thanks for confirming.