Mark Albery
Well Known Member
The OP62 plans are not very clear about mounting vent-00002 on the RV-14. All the detail photos are only relevant to the 14A.
Do we use the same bushing arrangement as in OP 62-17 fig 2A?
Do we align the left hand adel clamps to route the scat through the loop in the oil cooler hose?
A clear photo of a finished installation would be much appreciated
Do we use the same bushing arrangement as in OP 62-17 fig 2A?
Do we align the left hand adel clamps to route the scat through the loop in the oil cooler hose?
A clear photo of a finished installation would be much appreciated