[rwarre]

I used the Z11 wiring diagram for my RV7a electrical. I have two 2-5 toggle switches for the left mag/start and right mag. I now want to put a key switch in the starter circuit that will break the continuity if the starter/toggle switch is accidentally hit. Any suggestions on the type of keyed switch I might use.

 

[Bushcaddy]

locking toggles?

If you are set up for toggles and are concerned about accdently hitting the switches I would suggest a locking toggle, rather than introducing a keyed switch into the mix. There are numerous varieties out there. Newark Electronics or Mouser are good sources.