In case you are curious or are thinking of expensive aftermarket ports, most find that the rivets per the plans is as accurate as anything.
Thanks for the references. The builder of my 6 installed a blade type pitot-static sensor on the left wing. No other static ports were installed. I've been having problems with my autopilot holding altitude. Turns out it was excessive static lag. I'll need to go back and install static ports per the manual.
-Jason
Thanks for the references. The builder of my 6 installed a blade type pitot-static sensor on the left wing. No other static ports were installed. I've been having problems with my autopilot holding altitude. Turns out it was excessive static lag. I'll need to go back and install static ports per the manual.
-Jason
Section 8 page 8-22 in my manual and SK-61. The instructions were also included in the static kit from Vans.