John R. Graham
Active Member
In my shop, I'm thinking about doing a stainless steel sink and drying board for preparing parts for priming (with a separate holding tank for proper disposal of Alodine rinse water).
Should I be concerned about galvanic corrosion between the aluminum and the stainless, and thus, perhaps, plan on an insulator on top of the drying board? Or, should I be considering something else altogether?
- John
Should I be concerned about galvanic corrosion between the aluminum and the stainless, and thus, perhaps, plan on an insulator on top of the drying board? Or, should I be considering something else altogether?
- John
Last edited: