S slngsht Well Known Member Aug 11, 2021 #1 Hi, I'm looking at drawings 28 and 30, and see no details for fasteners that hold the big elevator pushrod. drawing 30 shows AN3-10A bolt and a nut. but no mention of washers or spacers at all. Does anyone have details on that?
Hi, I'm looking at drawings 28 and 30, and see no details for fasteners that hold the big elevator pushrod. drawing 30 shows AN3-10A bolt and a nut. but no mention of washers or spacers at all. Does anyone have details on that?
R rv4ross Active Member Friend Aug 11, 2021 #2 My drawing 30 says to see Note 1 for that connection. Note 1 says to use washers as required or make spacers out of AT6-058X5/16 to center the rod end.
My drawing 30 says to see Note 1 for that connection. Note 1 says to use washers as required or make spacers out of AT6-058X5/16 to center the rod end.