I bunged a couple pins during install and hate to toss the rest of the $30+ kit just because the pin is missing. Digikey and Mouser both carry them but the minimum order is 750 (~$1500).
I don't think the BNC pins are compatible.
Or...
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2060353.m570.l1313.TR1.TRC0.A0.H0.Xtnc+connector.TRS0&_nkw=tnc+connector&_sacat=0
This stuff's not rocket surgery...
They are available from DigiKey at $2.24 each, minimum quantity is 1.
DigiKey part number is ACX1070-ND.
The above P/N is for RG58 cable. The DigiKey P/N for a similar connector that fits RG400 & RG142 (more common in GPS installations) is ARF1135-ND and list for $6.67 each. This is for a whole connector assembly, not just the center pin.
Thanks, All.
Looks like I'll be buying more kits but < $10 at Digikey is much better than the ACS price. Hopefully the quality is as good.
Send me a picture of what you need (close up if possible). I may have what you need...
There's no rule that says you have to use the rest of the connector that you got in the kit. Find one that fits your cable, and install it. Throw away the one you lost the parts for.
Ebay isn't the only option, but $20 (or $200) for a $2 connector aren't the only options, either.
Thanks, All.
Looks like I'll be buying more kits but < $10 at Digikey is much better than the ACS price. Hopefully the quality is as good.
Look at the specs, a Mil connector would be beryllium copper center with gold plating and a brass, silver plated body. The materials and corrosion protection are the big differences. I have a bunch of military BNC connectors that are 60 yrs old and the silver is still good. Nickel on brass as durable. Just so you know. No recommendations made.