Lemmingman
Well Known Member
The wing kit comes with several bags simply labeled "Misc Bolts" "Misc Washers" and "Misc Nuts". There are 4 kinds of washer, 3 kinds of nut and several kinds of bolts. I'll resist the temptation to rant about this, in this forum.
One of the things that I'm curious about is measuring the bolts. According to research the last digits on a bolt indicate the whole number value in inches + the additional length in 1/8". So an AN3-34 for instance means 3" + 4/8 or 3 1/2".
The problem I having is that some of my misc bolts are measuring 1/16th of an inch. So its not a -33 or a -34 its a -33.5. Is there a rule to round up or round down, in these cases? 43.13 doesn't seem to shed any light on this that I can find.
One of the things that I'm curious about is measuring the bolts. According to research the last digits on a bolt indicate the whole number value in inches + the additional length in 1/8". So an AN3-34 for instance means 3" + 4/8 or 3 1/2".
The problem I having is that some of my misc bolts are measuring 1/16th of an inch. So its not a -33 or a -34 its a -33.5. Is there a rule to round up or round down, in these cases? 43.13 doesn't seem to shed any light on this that I can find.